5-276-10-084-002

A two-pass U-bend bundle gives this configuration the thermal and mechanical margin expected of TCS/TCW tank heater equipment in in-tank heating with boiler water in the tubes. The bundle mounts through a collar in the tank wall and heats the surrounding fluid by natural convection. Physically, the unit runs a 10-inch shell, 84-inch shell length, and roughly 83-3/8 inches overall in a 2-pass arrangement. That works out to about 101 square feet of heat transfer surface on 3/4-inch O.D. tubes. Standard construction uses cast brass bonnets, steel shell, copper tubes, and brass tubesheets. Design ratings run to 150 PSI on the shell side, 150 PSI on the tube side, and 375°F maximum temperature. This build is designated 5-276-10-084-002.