5-271-10-096-001

Configured for in-tank heating with steam in the tubes, this configuration carries the two-pass U-bend bundle construction that defines the TCS/TCW tank heater range. The bundle mounts through a collar in the tank wall and heats the surrounding fluid by natural convection. Physically, the unit runs a 10-inch shell, 96-inch shell length, and roughly 95-3/8 inches overall in a 2-pass arrangement. That works out to about 116 square feet of heat transfer surface on 3/4-inch O.D. tubes. Standard construction uses cast iron bonnets, steel shell, copper tubes, and brass tubesheets. Operating limits are 150 PSI on the shell side, 150 PSI on the tube side, and 375°F maximum temperature. Common applications are boiler feed and condensate tanks, process tank heating, and wash-down and sanitation water storage. This build is designated 5-271-10-096-001.